The SafePass W 30R adjustable infrared safety beam with a wireless transmitter provides a convenient and safe gate automation system for even the most challenging of installations.
The W 30R is compatible with 12VAC/DC and 24VAC/DC voltage. The wireless receiver is the only component that needs to be connected to the power supply which means no digging across the driveway, saving both time and money.
The external 180 degree rotation means set up is easy, simply rotate to align. The great design and a 30 metre range makes the W 30R PE safety beams a pleasure to work with.
The system is fail safe and with the very low power consumption. The batteries will last a minimum of two years and then when the battery power is low an on board buzzer will give a warning signal.
The SafePass W 30R Adjustable PE Safety Beam includes the following features
External 180 degree rotation – simply rotate to align
Quick, easy installation with built-in laser beam alignment system
The transmitter is wireless and battery-operated saving time and money
30 meters operating range – ideal for almost any entrance gate
Fully ant-proof and weather-resistant enclosure for greater reliability
Transmitter provides audible feedback for easy setup and battery-low indication
Low power consumption throughout the system for greater efficiency.
For more information download our product datasheet.
Competitively priced, all our door and gate safety equipment solutions comply with international standards. For reliable accurate detection select from our extensive range of loop detectors and logics, vehicle detectors, safety beams, and safety light curtains to secure your gate or entrance.
Loop Detectors:Considered one of the most effective methods of vehicle detection, loop detectors prevent boom gates or garage doors from closing while a vehicle is in the roadway.
Microwave Vehicle Detectors: Our vehicle detection devices provide an efficient and cost-effective alternative to loop detectors and safety beams. Designed for parking and access control applications these vehicle detectors are mounted above ground, on walls and ceilings, providing the flexibility to accommodate many scenarios.
PE Safety Beams: Commonly used as safety devices to prevent industrial doors or gates closing on pedestrians or vehicles. The latest PE safety beam designs are wireless and do not need cables to each side of the driveway saving time and money.
Safety Light Curtain: Used in situations where maximum coverage is required our safety light curtain’s multiple beams are spaced to ensure the area is covered. Easy to install and weatherproof design makes it suitable for all types of entrances including gates, boom gates, and doors.
With a very fast response time of 12ms the loop will provide an excellent safety feature for even the fastest doors and parking boom gates.
The LD116 and LD216 series of loop detectors have the sam... Read More
The LD140 series uses cutting edge technology to provide a loop detector with selectable parameters, all programmable from the buttons on the front panel.
The LD140 has all the functions ... Read More
The combination of extremely small dimensions and ease of installation mean that the VR12 can easily be fitted into very confined spaces.
Drill a 13 mm hole and insert the VR12 PE which clips into ... Read More
The Photon Battery PE Safety Beam combines the latest technology with a battery powered transmitter in a compact waterproof IP 54 ABS enclosure.
Until now the only alternative was a reflective safe... Read More
The i5 infra red beam consists of a transmitter and receiver unit mounted on opposite sides of the entrance.
The transmitter sends a modulated infra red beam to the receiver. When the beam is int... Read More
The VP920, VP910 & FT981 Vandal Proof PE Safety Beams will withstand extreme abuse making them suitable for installation in vandal prone areas, close to night clubs, unsupervised car parks and ind... Read More
The PC50 Reflective Safety Beam is a high quality compact unit housed in a durable IP67 ABS waterproof enclosure.
The PE beam is supplied with a mounting bracket to allow for easy adjustment. Ali... Read More
The small size of the LD113 and LD213 loop detectors with its 4 screw fixing points make them ideal for mounting in confined spaces. A large number of functions can be incorporated into a small pack... Read More
The new design LD 100 and LD 200 series of loop detectors have high noise immunity as standard which prevents interference from outside sources.
The eight sensitivity settings and ASB (automatic se... Read More
The LD106 is an ultra low power single channel induction loop detector designed for parking and access control applications. With a very fast response time of 120ms the loop will provide an excellen... Read More
The BL100 combines the features of a loop detector and boom gate logic into a single unit. Designed to control boom gates with torque motors the BL100 has inputs for PE safety beams or free exit loop... Read More
The SafePass MD102 Vehicle Detector has been designed for parking and access control applications and is a cost-effective solution for detecting vehicles to automatically open of gates and boom gates.... Read More
Capable of detecting vehicles up to a distance of 6 metres - providing greater security and safety around boom gates
The RD6 Radar Detector is simple, practical and convenient to install.... Read More
Wired infrared PE Safety Beam - 20M operating distance
The beams are self aligning up to 5 metres and can operate up to 20 metres. Transmitter and receiver are housed in an IP65 ABS wat... Read More
Wired infrared PE Safety Beam - 180 degree adjustable - 20M operating distance
The SafePass I 20R adjustable infrared safety beam provides a convenient and safe gate automation system for... Read More
Increased safety in harsh environments - 10-metre detection range - IP67 for outdoor use
The SG19 light curtain system consists of a self-contained transmitter, SGT and receiver, SGR, w... Read More
Wireless infrared PE Safety Beam – 30M operating distance
The W30 infrared gate safety beam with a wireless transmitter provides a convenient and safe gate automation system for even th... Read More
Product Pricing and options
Please Note : Some products and product combinations may require a custom shipping quote.
Image
Description
Stock Code
Price (Incl GST)
PE Beam Cover Mounting Bracket Pair
20013
$63.80
SafePass W 30R 180 Degree Adjustable PE Beam to 30 Metres