ELKA KM Heavy Duty Linear Swing Gate Opener | Gates to 6M

High-quality German engineering – Industrial strength swing gate opener-  High duty cycle – Up to 700 operations a day – Safety sensing

 

The ELKA KM linear swing gate opener is a high-quality, heavy-duty swing gate opener suitable for large industrial gates up to 6 metres and can handle up to 700 operations a day. The ELKA KM has machined steel gears that drive an internal gear rack to open and close the gate and features impact-resistant ABS with soft start and stop, safety sensing and an easily operated emergency release. The elegant housing is constructed of anodized aluminium.

It is recommended that all gates over 4 metres in length have a lock. Rotech can also supply an electromagnetic bolt which works with the operator’s built-in control panel, to securely lock the swing gate. The lock can be mounted vertically or horizontally on the gate.

Manufactured by a German company with more than 35 years experience and over 50,000 boom gates and gate openers installed in 70 countries you are assured this swing gate opener will give you many years of reliable operation.

The ELKA KM Heavy Duty Swing Gate Operator includes the following features:

  • The KM has machined steel gears that drive a gear rack to open and close the gate
  • Elegant housing made of anodized aluminium and impact-resistant ABS
  • Soft start and stop reduces wear on the operator and the gate
  • Safety sensing and safety PE beams protect vehicles and pedestrians
  • Easily operated emergency release if there is a power failure
  • The electromagnetic bolt is 20 mm diameter and made of stainless steel which will securely lock the swing gate.

 

For more information download our product datasheet

Specifications KM 400 KM 600
Max. length of wing with max.50% wind resistance 4000mm 6000mm
Max. surface area of wing with max.50% wind resistance 10.0sqm 12.0sqm
Max. weight of wing 400kg 500kg
Requires electromagnetic bolt or lock Yes Yes
Emergency release at the gate opener By special key
Run time (depends on the stroke & the speed selected) 12 – 16 secs 24 secs
Max. opening angle Up to 120°, depending on the mounting dimensions
External stops required at GATE OPEN position Yes Yes
External stops required at GATE CLOSED position Yes Yes
Power supply 230V/50Hz 230V/50Hz
Motor voltage 24V dc 24V dc
Duty cycle 50% 50%

 

For more information download our product datasheet

Download our information about installation and operating instructions