D10 & D20 SMART Sliding Gate Opener for 1000kg & 2000kg Gates | Industrial Heavy Duty
24 VDC High-Speed- Heavy Duty – Industrial operators designed for gates up to 1000 and 2000 kg
The D10 & D20 SMART sliding gate operator’s innovative design offers speed, performance, convenience and control at your fingertips – ideal for commercial and industrial applications where heavy gates are installed and reliability is essential.
These SMART sliding gate operators high torque 24vdc motor coupled to a die-cast aluminium gearbox to provide an automation system that is fast, powerful, and easy to set up.
The powerful D10 SMART is suitable for gates weighing up to 1000 kg and will open a standard 4m gate in 10 secs. The D20 SMART is suitable for gates up to 2000 kgs and will open a 4m gate in 14 seconds.
Perfect for unit/residential complexes, warehouse and factory entrances etc.
The D10 & D20 SMART Sliding Gate Operators include the following features
Battery backup is standard: for peace of mind during power failure situations — the 24 volt battery backup system allows the sliding gate to continue to function for up to 120 operations
Speed control: independently adjustable opening/closing speeds allow the gate to open at full speed and close at a slower to minimise accidents and damage to the gate
Advanced safety features: Cutting-edge obstruction detection technology provides the highest level of reliability and positional accuracy
In-built radio receiver: high-security code-hopping Nova radio receiver is built into the control panel – up to 1500 individual transmitters can managed using the MyCentsys Pro app
Individually configurable inputs and outputs
Manual release: a convenient and intuitive single-action manual release
Fast installation and fault finding: innovative in-app diagnostics measure and monitor many aspects of the operator’s performance in real-time, including the state of the controller, battery condition and status of connected external accessories. The diagnostic function reduces installation time and makes it easy to identify faults.
Operation and intelligent logging and reporting: The My Centsys Pro app provides feedback about the gate’s status directly to a mobile phone. Phone alerts keep users updated on events including; the condition of the battery i.e. low voltage, the gate status, the speed at which the gate is running and the state of connected accessories such as PE beams and loop detectors.
For more information download our product datasheets
Effortless operator set-up and gate management using your smartphone
MyCentsys Pro App (for installers)
The MyCentsys Pro app makes setting up and configuring the operator’s many features quick and easy. Set the gate limits, speed, automatic closing and unique profiles for users, with just a few taps.
Once connected to the gate operator, the intuitive interface is incredibly simple to use, with a user-friendly graphic front-end and built-in tutorials giving quick and easy access to a host of features.
Step by step gate limit and configuration wizard
Detailed diagnostics and real-time display of system health (for example battery voltage and mains on/off)
Backup and Restore NOVA transmitters using MyCentsys Cloud— manage up to 1500 NOVA transmitters from your phone (custom name, add, edit, delete, disable)
Quick access to technical support
Access to device event logs (for example last remote pressed, collisions detected)
Seamless integration with SMARTGUARDair wireless access control keypad
Multiple custom gate triggers (mode of operation, speed and autoclose)
Adjustable safety parameters such as gate sensitivity to obstructions
Easily back up and restore settings
Download the MyCentsys Pro App to get simple mobile access to set up and configure the D10 & D20 SMART sliding gate operator.
MyCentsys Remote App (for users)
Take control of your gate and/or garage access with MyCentsys Remote
MyCentsys Remote is feature-rich interface for all gate access and automation requirements. This app that seamlessly integrates with both SMART and ULTRA solutions providing live device status and health information, push notifications, and the ability to trigger actions, all in one convenient app.
Ability to conveniently open and close the gate operator from your phone
Keep an eye on device health, battery status, and mains presence of their gate operator, all from within the app
Biometric and PIN options available for increased protection
Configure your favourite actions, customise device icons, and receive in-app notifications of errors and alarms
Expert assistance is available via the app’s technical support chat function.
Download the MyCentsys Remote App to get simple mobile access to control and manage the D10 & D20 SMART sliding gate operator.
Specifications
D10-SMART
D20-SMART
Input voltage1
90V – 240V AC +/-10% @ 50Hz
Current consumption (Mains)
250mA
Battery charger current output
1.8A @ 27.4V +/-1%
Max no of operations per day- Mains present 2,3
750 3,6
Duty cycle – Mains present 2,3
Continuous
Motor voltage
24V DC
Motor power supply
Battery-driven
(Standard Capacity 2 x12V 7.2Ah)3
Current consumption (motor at rated load)
8A
9A
Input/Output sink currents (Max accessory current draw)
I/O 1-4
100mA (12/24V)
I/O 5 and 6
3A (12/24V) 10sec Pulse
Motor push force – starting
40kgf
52kgf
Motor push force – rated
30kgf
39kgf
Gate mass – maximum
1000kg
2000kg
Gate length – maximum
25m
25m
Gate speed (varies with load) 4
Up to 26m/min
Up to 18m/min3
Manual Override
Lockable with key release
Drive Pinion
17T Module 4
13T Module 4
Operations in battery backup mode with 7.2Ah batteries
Half day 2, 5, 6 Power Saving -15m/min 15kgf
Normal – 26m/min 15kgf
118
63
101
155
Full day 2, 5, 6 Power Saving -15m/min 15kgf
Normal – 26m/min 15kgf
93
50
80
45
Collision Sensing
Electronic
Operating temperature range
-15°C to +50°C
Onboard receiver type
Code-hopping multichannel receiver with selective add and delete
Rolling code (Keelog encryption) multichannel
Receiver code storage capacity
1500 Remotes7
Receiver frequency
433.92MHz
Degree of protection
IP54
Mass of unit packed (with standard kit, but excl. rack and battery)
13kg
(18kg with battery)
Packaging dimensions (with standard kit, but excl. rack and battery)
350mm wide x 282mm deep x 470mm high
1 Can operate off a solar supply, consult your local dealer for assistance
2 Based on 25°C ambient temperature and unit not in direct sunlight
3 Based on a motor push force of less than 50% of rated (Starting and Running forces)
4 Opening and closing speeds can be configured to run slower depending on the requirements of individual installations
5 Can increase battery capacity for longer standby times
6 Based on 4m gate, excluding all accessories
7 Multiple buttons per remote can be used
For more information download our product datasheets
Need fast, secure vehicle access control - choose from our range of high duty cycle boom gates with optional solar power. Our sliding and swing gate openers are suitable for all domestic, commercial... Read More
Whether security is your priority or you need to monitor the movement of
people, Rotech's range of full and waist height turnstiles, rapid access gates, flap barriers and pedestrian swing gates can d... Read More
Our safety and security products feature a wide range of loop detectors and security beams options, including safety light curtains which provide maximum coverage for entrances, there is bound to be o... Read More
Product Pricing and options
Please Note : Some products and product combinations may require a custom shipping quote.
Image
Description
Stock Code
Price (Incl GST)
D10 SMART High Speed Sliding Gate Operator (Batteries included)
4078
$1,779.25
D20 SMART High Speed Sliding Gate Operator (Batteries included)
403
$1,958.00
D20 SMART High Speed Sliding Gate Operator (NO Batteries)
4077
$1,689.88
D10 and D5 SMART Low Voltage Kit, comprising 30 metres low voltage power cable, low voltage battery charger and 24VA transformer
406127
$448.80
Gate track 3 metre steel suitable for 20 mm groove wheels
4700
$104.72
Recessed wheels – 90 mm dia x 20 mm groove rated for (300kg per wheel)
4710
$43.82
Recessed wheels – 120 mm dia x 20 mm groove rated for (400kg per wheel)
47101
$101.64
Bolt on wheels -120 mm dia x 20 mm groove rated for (400kg per wheel)
47103
$84.37
Gate stop for bolting onto floor
4718
$52.98
75mm gate slide blocks
4725
$70.84
Guide Roller 40 dia x 60 long
4722
$22.41
Guide Roller 40 dia x 140 long
4724
$92.25
Guide plate 4 rollers 45 x 30 for 35-60 mm channel
4713
$103.18
Guide plate 4 rollers 45 x 30 for 70 -110 mm channel
47132
$233.75
Gate catches for 50 mm Gate Frames
47223
$40.58
Gate catches for 75 mm Gate Frames
47224
$58.52
Heavy Duty Nylon Rack Mod 4 steel reinforced – 1m lengths, 6 point fixing legs down max 800 kgs -1 metre lengths
4501
$23.87
Steel rack MOD 6 up to 4000kg – 2 m Lengths. 30mm x 30mm (CONTACT US FOR PRICING)
Our extensive access control equipment range includes:
Push buttons and key switches for activating garage doors or automatic gate access control system: our range of high-quality industrial push button stations and key switches are available in numerous configurations to suit...
Competitively priced, all our door and gate safety equipment solutions comply with international standards. For reliable accurate detection select from our extensive range of loop detectors and logics, vehicle detectors, safety beams, and safety light curtains to secure your gate or entrance.